Rubbi Motorcycle/Scooter/Bicycle Handlebar Safety Lock

1. Highly durable deterrent
   The reinforced nylon housing of the lock is built around 4 hardened steel rods that run from the lock cylinder to the hinge, ensuring seamless security and maximum resistance to common lock-breaking tools.
   
   
2. Easy storage
   With a weight of 330 grams and compact dimensions (4.5 x 5 x 15 cm), the Grip-Lock fits in your jacket pocket, under the seat compartment.
   
   
3. Pagoda lock system
   The Pagoda locking system used for Grip-Locks provides a lock and key system where key control, tamper resistance, and resistance to physical attacks are maximized. It uses 4 unique round discs that are activated for unlocking by a highly precise double-sided key. With spring tension and the graduated serrated design, which is standard in each lock, the tamper resistance is extremely high. Anti-drill pins resist drilling attempts and provide additional resistance to opportunistic thieves.
   
   
4. UV-resistant
   The glass-filled polyamide housing has undergone accelerated aging tests in UV chambers simulating decades of intense sun exposure. Every component, even the sticker, is of the highest quality to ensure that the Grip-Lock will withstand the test of time under the toughest conditions.
   
   
5. Adjustable sliding knobs
   Allows you to precisely adjust the pressure on the brake lever to ensure that the brake is not overly stressed when not in use for extended periods.
   
   
6. Replaceable handlebar adapter pads
   Each Grip-Lock comes with 3 different sized rubber inserts that can be adjusted to fit all handlebar grips between 27 and 38 mm (1.0 to 1.5 inches).

Usage
Get the most out of your Grip-Lock with these helpful instructions and tips.

• Insert rubber pads
  Grip-Lock comes with three different sized rubber pads. The first step is to select the two rubber adapters that can clamp around your throttle. If desired, you can glue these in place.

• Adjust slider
  Squeeze the sides of the adjustable slider together and position it to apply acceptable pressure on your brake lever. It does not need to be overly tight.

• Attach to handlebars
  Place the Grip-Lock on the right side of your motorcycle where the throttle and brake lever are located. Squeeze your brake lever and insert it into the Grip-Lock's slider.

• Close & Lock
  Once the Grip-Lock is in place, close it and press the lock to secure the Grip-Lock. You can do this both with and without the key by sliding the lock into the correct position.

• To open
  Simply insert the key, turn it 1/4 turn clockwise, and let the lock pop open. Tip! Squeeze the end of your Grip-Lock together to release the lock mechanism more smoothly.